Hi, my name is Pablo and I live in Chile. I bought a Fysetc F6 V1.3 card to replace a Ramps. It's wonderful, the engines don't sound, but I have problems with the SD card. I have not been able to make it work. On the EXP2 door the LED light on the SD does not turn on or read the card. On the SD door it turns on the LED light but does not read the card. The screen always shows the message "Please insert SD card". I have also tried changing different versions of the Pins_Fysetc_F6 file. I finally tested the SD reader with an arduino one and it worked fine.
I would appreciate your help, I'm already very complicated to find no solution. Thank you.
Hello Pablo, i had the same problem as you, try this, on the side of the Exp2 connector there is 3 pins, try to put a jumper between 2 of them and see if the led of the External SD Card turns on, if not, change the jumper to the other 2 pins, it worked for me!
Work fine for me!!! Thank you very much.
Hello I have a same problem. When i put the jumper Led starts the work. but i had a same message "please insert the sdcard"
Where is the problem?