Hello !
I want to change the firmware on the printer Anycubic 4Max Pro ... The display is installed there 095P2E18550A0 I do everything as indicated in the instructions on the wiki, but nothing happens. Please help me !
What mother board are you using ?
Anycubic Trigorilla motherboard
Sorry , i'm not familiar with that board. But if you want to use 4.3 touch screen, you do need RX and TX and set the correct UART port in configuration_adv.h file https://github.com/FYSETC/FYSTLCD-2.0
No. I have 3.5" LCD