j'ai problème avec votre carte la nouvelle pour la ender 3. il ne sauvegarde rien si j'éteins la machine tout ce remet a zéro les réglage. faut trouver une solution s'il vous plait.
CE N4EST PAS POSSIBLE DE METTRE LES REGLAGE TOUT LE TEMPS.
Merci
The STM32F103 have no EEPROM,but we are working for this,we will add a chip next version or other methods. in fact,marlin support save the config to SD card,If you are interested, you can try it out.
Bonjour merci de votre réponse j’ai quand’ même réussi à résoudre ce problème après avoir compris il faut une sauvegarde sur la carte SD. Merci
We are working on this problem. We have found a way to update the software, but need some time.
What about just activate it in the firmware ? it works...
fthouret Which parameter do we have to set / update ?
Config will be saved on SD or on motherboard ?
Thank you.
find #define EEPROM_SETTINGS in configuration.h section "Additional Features"
it'll be stored on eeprom. I didn't tested it, for what I remember, as I modified settings on pc and then upload them via usb.
be carefull with modifications :-)
If you only open the #define EEPROM_SETTINGS config it will be store on sdcard at the moment. So you need to insert the sdcard before you power up the machine.