I was able to go beyond the logo by using the S6 board and connecting to J1 with 4 cables only. I hope this helps @GeorgeFu .
Thanx
paketos
Thank you!!!! I checked the F6 schematics and noticed that the FPC Connector uses Serial Port 2. Now it is working!! I had to change DGUS Serial Port in configuration_adv.h from 3 to 2.
Before: #define DGUS_SERIAL_PORT 3
#define DGUS_SERIAL_PORT 3
After: #define DGUS_SERIAL_PORT 2
#define DGUS_SERIAL_PORT 2
nguidi
After the update (with the 2.0 versions of screen and Marlin firmware) I have this on my "Print" menu.
I updated again, tried with another SD card, tried with shorter file name, ..., but it still like that on my print menu!!
Someone can help me?
Can you give the link of screen frimware that you use? And how do you update the firmware? And can you controll the machine with this screen , like move axis?
GeorgeFu For the F6 board I used this firmware: "https://github.com/FYSETC/Marlin-2.0.x-FYSETC/tree/F6/2.0.x". To update this firmware I followed the instructions from: "https://wiki.fysetc.com/F6_V1.3/" with Arduino IDE.
For LCD I used this firmware: "https://github.com/FYSETC/FYSTLCD-2.0" To update the display's firmware, I followed the instructions in the video: "https://www.youtube.com/watch?v=Ez6qQsYpgLg&feature=youtu.be", and made the changes on Marlin (like on https://github.com/FYSETC/FYSTLCD-2.0): #define MOTHERBOARD BOARD_FYSETC_F6_13 #define DGUS_LCD_UI_FYSETC
I can move the axis, heat the extruder, but I can't see any file or start a print. I already change the SD Card, put new file there, but still the same on the display.
I update the FYSTLCD-2.0 firmware , https://github.com/FYSETC/FYSTLCD-2.0 , have a try.
GeorgeFu Exactly the same result.
Is it just me who is having problems with the Fysetc display + F6 board??
They wore working before update to Marlin 2.0.x...
I think you should enable SDSUPPORT in configuration.h bohncarlos
Let me test it again
GeorgeFu I'm trying to get F6 to work with Marlin 2.0.9.2 to use on my CNC. I have almost everything working but when I try to read the card, the files don't appear as in the attached photo. I have already upgraded the display firmware that was working with Marlin version 2.0.5.
GeorgeFu working great now!! thanks for your help! 😀
I'm looking for my assignment help Reddit reviews? Can you recommend me reliable platforms ready to help me with doing homework. I'm tired of boring writing.